Using The Detergent And Additives; Setting And Starting A Programme - AEG L 76460 TL Handbuch

14

USING THE DETERGENT AND ADDITIVES

Always obey the instructions
that you find on the packaging
of the detergent products.

SETTING AND STARTING A PROGRAMME

1. Turn the programme knob. The re-
lated programme indicator comes
on.
2. The indicator of button
with red colour.
3. The display shows the default tem-
perature and spin speed. To change
the temperature and/or the spin
speed, press the related buttons.
4. Set the available functions. The indi-
cator of the set function comes on
or the display shows the related
symbol.
5. Press button
gramme. The indicator of button
is on.
INTERRUPT A PROGRAMME
1. Press button
flashes.
2. Press button
programme continues.
The detergent compartment for the prewash phase and the soak pro-
gramme.
The detergent compartment for the washing phase.
Liquid additives compartment (fabric conditioner, starch).
The mark M is the maximum level for the quantity liquid additives.
4 flashes
4 to start the pro-
. The indicator
4
again. The washing
4
CANCEL A PROGRAMME
1. Press button
gramme and to deactivate the ap-
pliance.
2. Press button
the appliance. Now, you can set a
new washing programme.
The appliance does not drain
the water.
CHANGE A FUNCTION
You can change only some functions
before they operate.
4
1. Press button
flashes.
2. Change the function set.
SET THE DELAY START
1. Press button
until the display shows the number
of minutes or hours. The related
symbols comes on.
to cancel the pro-
1
1 again to activate
4 . The indicator
5 again and again