Troubleshooting - Zanussi ZDC8203W Benutzerhandbuch

Cleaning the condenser
1
3
1
1
2
5
7
2
2
1

Troubleshooting

You cannot activate the appliance.
The programme does not start.
26
2
1
4
6
8
Problem
Cleaning the drum
WARNING!
Disconnect the appliance before you
clean it.
1
Use a standard neutral soap detergent to clean
2
the inner surface of the drum and drum ribs. Dry
the cleaned surfaces with a soft cloth.
CAUTION!
Do not use abrasive materials or
steel wool to clean the drum.
Cleaning the control panel and housing
Use a standard neutral soap detergent to clean
the control panel and housing.
Use a moist cloth to clean. Dry the cleaned
surfaces with a soft cloth.
CAUTION!
Do not use furniture cleaning agents
or cleaning agents which can cause
corrosion to clean the appliance.
Cleaning the airflow slots
Use a vacuum cleaner to remove the fluff from
the airflow slots.
Make sure that the mains plug is connected to the
mains socket.
Check fuse in fuse box (domestic installation).
Press Start/Pause.
Make sure that the appliance door is closed.
Possible solution
www.zanussi.com