PeakTech 1007 Bedienungsanleitung Seite 44

Rotary with Push button
g. Change to the next selection when turning clockwise.
h. Change to the previous selection when turning counterclockwise.
i. In frequency editing, turn clockwise to increase the frequency setting.
j. In frequency editing, turn counterclockwise to decrease the frequency
setting.
k. When the cursor shows up in frequency editing, press the rotary push button
to cancel the cursor.
l. In rotary push trigger/gate function, press the rotary push button to generate
trigger/gate signal manually.
Pulse Width Adjustment Knob (P 1007)
a. Adjust the pulse width of the square wave.
DC/Offset Adjustment Knob
c. Adjust the DC level if the function output is set to DC.
d. Adjust the offset level if the output offset is on.
Pulse Width Adjustment Knob
a. Adjust the amplitude of the function out.
Internal AM/FM Adjustment Knob (P 1014 / 1016)
a. Adjust the internal AM/FM modulation factor output.
44