To ensure the best efficiency of appliance, first to remove any loose articles on the floor such as
clothes, paper, loose cables and extension cords as well as making sure to roll up curtains and
drapes off the floor to avoid any possible accidents. In case of a loose cable is tangled with unit,
the cable might move around with unit as it works and topple down the table, chairs, or cabinet
and cause property damage.
Starting Operation
1.Clean the dust bin.
2.Place the Cleaner on place with more free space in the room.
3.When the vacuum runs out of power, it will emit a buzz and automatically stop.
4.When the vacuum is not in use or prior to recharging, make sure the appliance is in the off
position.
Installing side brush
1. Turn counter clockwise to open the brush lid on the bottom of unit as shown in the following
diagram.
2. Put the brush on the holder then mount the brush lid back by turning clockwise.
3. The brush will be radiative after completing installation.
USING DUSTING PAPER