Operation Mode - switel BSW 220 Bedienungsanleitung

3 .
4 Reset the camera to factory default (See Fig. 9.)
When the camera has been on for at least 1 minute, press the reset button (using a
small object or a pin) for 5 to 10 seconds.
The camera will beep 3 times and take about 1 minute to reset. The LED will start to
blink a dark orange color.
Note 1: If you do not hear a beeping sound, reset has failed. Please turn the
2: If you replace a new Wi-Fi router or if you forget the camera password,
4
4

Operation Mode

4 .
Viewing Live Video. See Fig. 10.
1
1. Camera name
2. Date and Time display
3. Online Number/ Resolution/ Frame Rate display
4. Information :
Tap the
5. Record :
Tap the icon to start record process when SD card is inserted.
6. Audio on/off and Talk back :
Tapping the icon can turn on/off sound or talk back to camera.
: audio on
: talk back
: mute
7. Snapshot :
Tap the icon to save a snapshot of the camera on your
smartphone or tablet.
8. Photo folder :
Tap the icon to see all of the photos you have taken.
9. Security On/Off
: Security On. Press it to activate alarm system. The camera will make a
: Security Off. Press it again to deactivate the alarm system. The camera will
10. Siren On/Off
: siren on.
: siren off.
camera back on and press the rest button again.
the camera needs to be reset to factory default.
Please refer to 3.3 - First time setup in the user manual, to set up the
camera again.
icon to get information about the camera. See Fig. 11.
short beep sound. All sensor alarms will work as pre-set.
make a long beep sound. All sensor alarms will be off.
12