Assembly Of Side Discharge; Engine Starting - IKRAmogatec BRM 1746 SSM TL Betriebsanleitung

illustration 5
1. To mount: Raise the rear cover and hitch the grass
bag on rear of mower. (Fig. 4,Fig. 5)
2. To remove: grasp and lift the rear cover, remove grass
bag.

ASSEMBLY OF SIDE DISCHARGE

1. Raise the cover flap and hitch the side discharge on
right of mower. (Fig. 6)
illustration 6
2. Grasp and lift the rear cover, remove grass bag.
Close the rear cover.
Before using the machine you must read the separa-
ted Engine instruction book carefully and service the
engine with gasoline and oil.
GB | Operating Instruction

ENGINE STARTING

Once the machine has been serviced properly, start the
engine as follow.
1. When starting engine, turn throttle choke lever to "1"
illustration 7
2. Standing behind the unit, grasp the brake control
3. Grasp the starter handle as shown followed figure
illustration 8
Blade is in action as soon as engine started. While
the machine is working maintain the brake control
handle in working position. The engine will stop as
soon as you release the brake control handle.
6
position, then you can turn the throttle choke lever
to"2" position to acquire higher speed.(fig. 7)
handle and hold it against the upper handle as shown
in figure followed.(fig. 8)
and pull up rapidly. Return it slowly to the rope guide
after engine starts. Release the brake control handle
can stop the engine and blade.
I
II