Panasonic CF-VDRRT2 Bedienungsanleitung Seite 16

Installing the Software
Installation
CAUTION
Make absolutely sure that the software is installed under the authority of the ad-
ministrator. Similarly, ensure that B's Recorder will be started up for the first time
after installation under the authority of the administrator.
See page 15 before using Media Player 7.
E
1
Insert the accessory utility disc into the drive.
(Setup starts up automatically, and the startup screen (setup menu) appears.)
NOTE
When the setup program will not run automatically, input [x:\asmenu] in [Start]
- [Run] and select [OK].
("x" is the drive letter of the drive. Change this to match the drive letter on your
own computer.)
2
Install [B's Recorder GOLD] and [B's CLiP] by selecting [BHA Recording
Software]; similarly, install WinDVD by selecting [InterVideo DVD Player].
(The installer of the selected software now starts so follow the on-screen instructions.)
During the course of the installation process, you will be asked to input your name and
company and a serial number. Input any name and company and the serial number
(marked on the case). (Watch out for characters that have a similar format.)
Unless you input these three items correctly, you cannot proceed to the next step.
3
Upon completion of the installation, click [END (X)] , and restart the
computer.
(The accessory software can now be used.)
CAUTION
Do not perform the standby or hibernation operation or connect or disconnect the USB
port while the WinDVD, B's Recorder or B's CLiP software program are running. Be
absolutely sure to perform these operations after the program or programs have been
exited.
16