Setting Up Your System; Setting Up Your Receiver; General Settings; Quick Start - Radix DTR 9000PVR Bedienungsanleitung

DIGITAL TERRESTRIAL RECEIVER DIGITAL TERRESTRIAL RECEIVER

Setting Up Your System

5. Setting Up Your System
This chapter explains the settings you will need to make before using the Receiver (Set−Top Box) for the first
time.

5.1 Setting Up Your Receiver

Connect the Receiver to your TV. Refer to Section
4.3 on Rear Panel Connections for more details.
Press the POWER button on the remote control or
on the Receiver. ˆON˜ message appears on the
front display of the Receiver and the Language
Selection menu appears on your TV.
Use the CH UP and CH DOWN buttons on the
remote control or on the Receiver to select the
language of your choice and then press the OK
button. The Auto Search menu appears.
The receiver starts automatically tuning the
channels. When the tuning has finished and all the
channels are visible on the list, the TV display
appears automatically.
GB GB

5.2 General Settings

In the General Settings menu, you can set the Time
Zone and other settings for the Receiver. In
general, if you purchased the Receiver from your
local vendor, these settings will already be as
appropriate for your area.
There are several items in the General Settings menu.
You can use these to set the various settings of the
Receiver. Use the CH UP and CH DOWN buttons or
the LEFT / RIGHT buttons to make a selection and
then press the OK button.
• Time Zone
Select the time zone for your location.
• Summer Time
Select "ON" to set Summertime or "OFF" to set Wintertime.
• TV Aspect Ratio
Select the aspect ratio for your TV (4:3 or 16:9).
• TV Signal
Select the video for your TV (CVBS / RGB).
• Menu Language
Select the menu language.
• Main Audio Language
Select the audio language for multi−language channels.
• Main Subtitle Language
Select the subtitle language for subtitle text.
• Antenna Booster Power
You can choose ON/OFF of 5V power supply to Antenna
• Logical Channel Number
You can select On/Off of local channel number
8

6. Quick Start

This chapter provides you with instructions on the basic operations of the Receiver. As mentioned
previously, the general settings and channels will already have been set for your area. That is, you should be
able to operate the Receiver without referring to the instructions in Section 5.

6.1 Switching Your Receiver On

Press the POWER button on the Receiver or on
the remote control to power on the Receiver.
Press the POWER button on the Receiver or on
the remote control again to switch to Standby Mode.

6.2 Selecting Channels

The following steps are for viewing a preset channel.
To select the channel you want to watch, use one of the following methods.
• Select the channel using the Numeric buttons.
• Select the channel using the CH UP and CH DOWN buttons on the remote control or on the
Receiver.
• Press the OK button and select a channel from the Total list.
Select the desired channel and then press the OK button. Your selected channel appears on the TV
screen.
• To return to the last channel you were watching, press the LAST button.
• Info Box
This is the box that appears at the bottom of your TV screen and displays information on the current
channel.
It displays information such as the titles of the current and next programmes as well as the quality of
terrestrial reception and signal strength. For more detailed information, select the title of the programme
you want to learn more about and then press the INFO button.

6.3 Volume Control / Mute Sound

Use the VOL UP and VOL DOWN buttons on the remote control to adjust the volume of the TV.
When either button is pressed, the volume indicator appears on the TV screen.
When you have finished adjusting the volume, the volume indicator disappears automatically.
Press the MUTE button on the remote control to disable the sound temporarily.
Press the MUTE button again to restore the sound.

6.4 Listening to the Radio

The Receiver also enables you to listen to radio stations.
To listen to the radio, press the TV/RADIO button on the remote control.
To return to TV viewing, press the TV/RADIO button again.
DTR 9000PVR DTR 9000PVR
Quick Start
GB GB
9