Liabilty Disclaimer; Safety; Symbols; Scope Of Supply - Advanced Energy ZME 1 Betriebsanleitung

26

3. SAFETY

4. ScOPE OF SuPPLY

2.1 LIABILITY DIScLAIMEr
The manufacturer shall not accept liability if the equipment has been
used for purposes for which it was not originally intended. responsibility
shall be borne by the owner, operator or user.
It is considered as an abuse of safety regulations if the ZME 1 / ZME 5
is used for purposes other than its intended one; this may endanger per-
sons. Any liability on the part of the manufacturer shall become null and
void in the event of improper use of the equipment. The risks of improper
use are borne solely by the own-er, operator or user of the equipment.

3.1 SYMBOLS

The following warnings, prohibitions and notices are used in the opera-
ting instructions:
Danger ZOne Warning - Danger
This warning sign indicates a hazardous situation. Failure to observe the
warning may lead to fatal or serious injury.
Danger - DangerOus vOLTage Warning
This warning sign indicates an especially dangerous situation. Failure
to observe the warning may lead to fatal or serious injury due to electric
shock. Kindly adhere to the described occupa-tional health and safety
procedures to avoid personal injury or equipment damage.
inFOrmaTiOn, nOTices
These notices indicate technical requirements and provide addi-tional
information that the user should bear in mind.
The scope of supply of ZME 1 / ZME 5 includes
• Subassembly ZME 1 (Order no. 2.000.003.470)
or ZME 5 (Order no. 2.000.003.741)
• Operating instructions ZME 1 / ZME 5
(Order no. 8.000.052.638)