Beurer ME 90 Gebrauchsanweisung Seite 41

3 Vrms
150 kHz to
80 MHz
Voltage dips,
short interrup-
3 V/m
tions and
80 MHz to
2.5 GHz
Power fre- 3 A/m
quency (50/60
Hz) magnetic
field IEC 61000-
4-8
NOTE UT is the a.c. mains voltage prior to application of the test level
Portable and mobile RF communications equipment
should be used no closer to any part of the ME 90 , inclu-
ding cables, than the recommended separation distance
calculated from the equation applicable to the frequency
of the transmitter.
Recommended separation distance
Recommended separation distance:
3 V/m
d = 1.2
d = 1.2
3 V/m
d = 2.3
Where P is the maximum output power rating of the trans-
mitter in watts (W) according to the transmitter manufac-
turer and d is the recommended separation distance in
meters (m).
Field strengths from fixed RF transmitters, as determined
by an electromagnetic site survey,
compliance level in each frequency range.
Interference may occur in the vicinity of equipment marked
with the following symbol:
Not applicable
Not applicable
41
80 MHz to 800 MHz
800 MHz to 2.5 GHz
a
should be less than the
b