03/2013
1009413-03
–
Unscrew the lid on the new canister.
–
Write the date on the canister.
–
Fit the canister in the holder.
–
Close the bed base. You should hear the bed base click into place.
5.18.2
Replacing the AQUA SYSTEM canister
–
Opening the bed base: see page 38.
–
Remove the canister.
–
Unscrew the lid on the new canister.
–
Remove the lid with the hose from the old canister.
–
Screw the lid with the hose onto the new canister.
–
Push the hose well down so that it touches the bottom of the canister.
–
Put the canister back in the device.
–
Close the bed base. You should hear the bed base click into place.
Cleaning and maintenance
Operating instructions – 49/62