Cleaning Or Replacing Lamps In The Side Section - BEAUTY ANGEL C 34 PLUS Gebrauchsanweisung

Cleaning and maintenance
42/62
– Then remove the short Beauty Light lamps (spaghetti lamps).
Replacing lamps: see page 39.
Replacing starters: see page 40.
The assembly is the same process in reverse order.
When assembling the device please note:
– Support the canopy panel with one hand so that it does not fall down.
– Refit and retighten the screws. Refit the middle screw first and then the
outer screws.
5.11 Cleaning or replacing lamps in the
side section
– Removing the side section panel: see page 37.
The following components listed in the maintenance plan are fitted in the side
section:
Beauty Light lamps 2.00 m

Beauty Light lamps (Spaghetti lamps) 0.52 m

Starters

– Remove the long Beauty Light lamps first.