03/2013
1009413-03
Replacing lamps: see page 39.
Replacing starters: see page 40.
Makrolon tubes (if fitted): see page 40.
The assembly is the same process in reverse order.
5.14
Cleaning or replacing the front panel
accent lighting
–
From the front reach into the front panel and remove the accent light.
Replacing lamps: see page 39.
Replacing starters: see page 40.
Makrolon tubes (if fitted): see page 40.
The assembly is the same process in reverse order.
5.15
Cleaning or replacing Ambient Light
(cabin lighting)
2 accent lights are located on the rear side of the canopy.
–
If necessary, cover the canopy in order to prevent the paint from being
scratched.
–
Remove the lamps on the rear of the canopy.
Replacing lamps: see page 39.
Replacing starters: see page 40.
Makrolon tubes (if fitted): see page 40.
The assembly is the same process in reverse order.
Cleaning and maintenance
Operating instructions – 45/62