Control; Play Back Control - Neepho Sonority Bedienungsanleitung

CONTROL

Connection via Bluetooth®
• Press the „Power-Button"
signal blinks blue-red).
• Activate Bluetooth® on your device and choose „neepho
Sonority" on the Bluetooth® device list. If a password
is required enter 0000.
• A successful connection will be confirmed by a short
tone (LED-signal blinks blue).
The next time the speaker is switched on it will automatically
be connected with the device connected previously, as long as
this device is available via Bluetooth®.
As soon as the speaker is connected to a device via Bluetooth®,
it is not visible to other devices anymore (also see „Change
of the playback device").

Play back control

• With a short press on the Forward-
you can navigate within your playlist.
• By prolonged pressing „Vol+"
the volume.
• By pressing the „Play-Button"
continue the music.
• Through a single press on the „Power-Button"
turn the speaker off.
Change of the playback device
As soon as the speaker is connected to a device via Bluetooth®,
it is not visible to other devices anymore. If you would like
to change the playback device while the speaker is connected
to another device you first have to disconnect the existing
Bluetooth®-connection.
until you hear a tone (LED
6
3
and Vol-
3
4
-23-
and Back- 5 Button
you can adjust
5
you can pause or
you can
6