„ K E E P C O O L " F U N C T I O N; Turning Off The Machine; „ P R E - C O O L " F U N C T I O N - SOLIS Gelateria pro 850 Bedienungsanleitung

„ K E E P C O O L " F U N C T I O N
• The KEEP COOL function will keep the frozen dessert cooled and churned for
up to 3 hours.
a) After preparation, press the KEEP COOL button. The button surround will illu-
minate and the display will state KEEP COOL.
b) In this mode, the appliance will cool and churn the ice cream mixture to main-
tain the desired consistency. Additionally, the compressor and paddle will turn
on at intervals.
• NOTE: In KEEP COOL mode, the compressor and motor will turn on at intervals
to check the consistency of the mixture. The paddle will only turn if the mixture
does not have the desired consistency anymore.
• The KEEP COOL function can be switched on or off at any time by pressing the
KEEP COOL button.
Exact time setting of the „KEEP COOL" function in MANUAL mode:
• Pressing the KEEP COOL button in MANUAL mode will stir and churn the mix-
ture for set time. A red light will illuminate and the display will state KEEP COOL
when function is selected. The paddle will turn as soon as the mixture does not
have the set consistency anymore.
T U R N I N G O F F T H E M A C H I N E
• To turn off the machine, you have to press the START/PAUSE button and, after
that, the POWER button - all control lights as well as the display will go out. You
should always unplug the machine when not in use.
„ P R E - C O O L " F U N C T I O N
• The PRE-COOL function decreases preparation time by lowering the temperature
in the ice cream machine. It can be switched on optionally and is ideal to use if
you have to prepare a mixture outside of the ice cream bowl or if you want to
speed up ensuing ice cream preparation.
• You can either add the ice cream mixture into the bowl and put it in the cham-
ber right from the start or you can put it into the bowl and then into the cham-
ber once the display states READY.
a) Attach the paddle to the shaft in the ice cream bowl.
b) Plug the machine into a suitable power outlet.
121