Warranty; Description Of The Components - Glomar EKS-2-ULTRA Bedienungsanleitung

Bedienungsanleitung / Instruction Manual EKS-2-ULTRA
Index
1. Introduction
2.

Warranty

3. Description of the electric-hydraulic
cutting unit
3.1

Description of the components

3.2 Brief description of the important features
of the unit
3.3 Description of the tool indication
4. Remarks in respect of the determined use
4.1 Operation of the units
4.2 Explanation of the application range
4.3 Mounting instructions
4.4 Service and Maintenance instructions
5. Troubleshooting
6. Technical data
7. Putting out of operation/waste disposal
Symbols
Safety warnings
Please do not disregard these instructions in or-
der to avoid human injuries and environmental
damages.
Operational warnings
Please do not disregard them to avoid dama-
ging the tool.
1. Introduction
Before starting to use the tool please read
the instruction manual carefully.
Use this tool exclusively for its determined use.
Cutting conductors/cables with the help of this tool must
only be performed by specially trained personnel. The mi-
nimum age is 16 years.
This instruction manual has to be carried along during the
entire life span of that tool.
The operator has
• to guaranty the availability of the instruction manual for
the user and
• to make sure, that the user has read and understood
the instruction manual.
2. Warranty
If the tool is operated according to its intended
use and the regular maintenance services are
observed our warranty is 24 months from the
time of delivery. Worn-out parts resulting from
its intended use are excluded. We reserve the
right to rework the tool in case of a justi ed war-
ranty claim.
3. Description of the electric-hydrau-
lic cutting tool
3.1 Description of the components
The electric-hydraulic cutting unit is a hand guided tool
and consists of the following components:
Table 3 (see Picture 1)
Pos. Description
1 LED (red)
2 Battery
cartridge
3 Trigger
4 Retract button Button to open the dies
5 LED (white)
6 Blades
7 Latch
8 Cutting head
9 Ring
10 Housing
9
Function
Indicator for battery charge con-
trol, tool functions and faults
Rechargeable 3Ah Li-Ion
battery (RAL2/BL1830)
Optional:
mains adapter NG2
Switch to start ccutting
procedure
in case of emergency
to illuminate the working area
cutting blades for light armoured
copper and aluminium connec-
tors and cables
device to open the cutting head
Solid 330° smoothly rotary hinged
cutting head for the reception of
the blades
device to secure the cutting tool
ergonomically formed plastic
housing in a 2-Component de-
sign for perfect handling