Activating The Av Input; Adjustment Of Colour, Contrast, Brightness - IMU 1424 Bedienungsanleitung

Activating the AV input

To activate the AV input of the MFD2 CD, press the "AUX" button and afterwards "TV" in the menu. With
MFD2 DVD, press "CD" and select "AUX" afterwards in the adjustment menu.

Adjustment of colour, contrast, brightness

These adjustments can be made with a bridge from the respective solder pad to + or –.
1: S=colour saturation
2: K=contrast
3: H=brightness
ATTENTION!
While a video (CVBS) signal is fed in, the multimedia interface is activated! Therefore, it is always
switched on or off simultaneously with the connected source. For this reason the connected source
should always be connected with the signal for ignition, avoiding an empty battery. The multimedia
interface is able to process PAL as well as NTSC. Switching is done automatically.
®
Copyright © by Audiotechnik Dietz Vertriebs-GmbH ● Germany
Rev 1, Stand: 09/ 2009
13
E
N
G
L
I
S
H