Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Manual for the
wireless Thermometer with
hygrometer and clock
item no. 14000
Fa. Karl Koch Thermometerfabrik GmbH
Wolferstetter Weg 22
D – 97900 Külsheim
www.koch-thermometer.de
The receiving unit (Front side)
The display is devided into two vertical zones with bog displays and additional small symbols:
top:
Temperature(s) at the sensor(s) (alternative Display)
bottom: Temperature at the base station / Clock /Hygrometer (Alternative Display)
Number of the external sensors (1-3)
Sensor is actively transmitting to the base unit
Actual temperature trend
Morning (AM) / Afternoon (PM) (aleternative Display)
Low battery level (there is a seperate indicator for the base station and transmitter)
Temperature scale °C or alternative °F
Temperature alarm activated
Shown Minimum (MIN) / Maximum (MAX)
Auto-Scroll-Mode: the display cycles through the installed sensors for five seconds
each
REMOTE CHANNEL = Choice of external sensor (1-3, as installed,
standard is only one, as adjusted)
CLEAR MEMORY = Delete teh actual saved Minima-/Maxima
results
RECALL MEMORY = Recall the intermediate Minim-/Maxima
results
INDOOR
= Change over the bottom display from inner
temperature (TEMP), humidity (HUMIDITY) and clock (CLOCK)
GERMANY
< front >
Displays
Buttons
Below you will find essential informtaion to istall and use our new wireless thermometers with
hygrometer. Please read this manual carefully so that you can become familiar with the unit's
functions and advantages.
Dear customer,
You have decided to purchase a Koch wireless product. Thank you for your trust. This product
was developed and produced using the latest technology and testing methods available. Should
you have problems with the unit, please get in contact with our company directly. We welcome
your ideas and comments since we want to offer to you an optimal product now and in the
future.
Manual fot the thermometer with hygrometer
The wireless thermometer allows you to view temperatures at a base receiver sent by up to
three external transmitters (at the frequenzy 433,92 MHz). This unit ships with a single
transmitter, but additional transmitters my be purchased at local retailers. The transmission
range is up t o 30 metres (assuming optimal conditions) and the base receiver features
additional functions like a clock and a selector for °C or °F. You may view maximum and
minimum temperatures including the ability to set alerts for high and low temperatures. A
hygrometer feature is also included for measuring the humidity at the base receiver.
Contents of packaging
Your box should have the following contents:
- a receiving unit (Thermometer)
- a sensor (transmitter)
- a plastic foot for tabletop use
We strongly suggest the use of alkali batteries
Receiving Unit: 2 x AA Batteries (Mignon)
Sensor (each): 2 x AAA Batteries (Micro)
Suggestions for optimal placement of the sensor
1. Like every thermometer you should not place the sensor in direct sun light.
2. Never immerse the sensor and the receiving unit into water or expose it to heavy rain. For
measuring the temperature of fluids you would need a special temperature probe that is not
currently available.
3. Bright backgrounds reflect temperatures while dark backgrounds absorb them. The placement
of the sensor in front of a dark background may adversely affect temperature readings.
4. Do not place the sensor near the floor. Best result are achieved at a height of about 1,5
metres.
5. You will achieve the best communications between the receiving unit and sensor if you
reduce the number of obstacles between them.
6. Please avoid using the sensor or the base station near computers, microwaves, wireless
phones, net adaptors or other units. They might disturb the transmission.
The base station (back side)
At the back side there are 5 buttons, a whole for a hook to hang the station and a door fort he
battery compartment (
).
Buttons (serial from left to right)
top:
Short pressing: No function
bottom:
Hold the
Individual adjustments were cancelled ort he
Hold/
bottom:
channel is been cancelled.
Clear
top:
Short pressing: Change between °C auf °F and back
°C/ °F
bottom:
Hold the
Change from 12 to 24 hours display at time
HOLD
bottom:
(12/24)
top:
Short pressing:
Adjusting the hours at the time
HR
Hold the
bottom:
Fast counting of hours
bottom:
Short pressing:
Increasing temperature at adjusting temp. alarm
+
Hold the
bottom:
Fast counting of increasing temperature
top:
Short pressing:
Adjusting the minutes at the time
MIN
Hold the
bottom:
Fast counting of minutes
bottom:
Short pressing:
Decreasing temperature at adjusting temp. alarm
-
Hold the
bottom:
Fast counting of decreasing temperature
top:
Short pressing: Activating / deactivating of the temperature alarm
ALERT
ON/OFF
bottom:
Hold the
Adjusting the temperatures of the alarm(s)
HOLD /
bottom:
SET
Overview
Batteries
<back side>
Werbung
