Troubleshooting; Declaration Of Conformity - STEINEL XLed Home 1 Handbuch

Troubleshooting

Malfunction Cause
■ Fuse faulty, not switched 'ON',
Sensor-switched LED floodlight
without power break in wiring
■ Short circuit
■ Twilight control set to night-time
Sensor-switched LED floodlight
will not switch 'ON' mode during daytime operation
■ Mains power switch 'OFF'
■ Fuse faulty
■ Detection zone not properly
targeted
■ Permanent movement in the
Sensor-switched LED floodlight
will not switch 'OFF' detection zone
■ Animals moving in the detection
Sensor-switched LED floodlight
keeps switching 'ON' and 'OFF' zone
■ Wind is moving trees and
Sensor-switched LED floodlight
switches 'ON' when it should not bushes in the detection zone
■ Cars in the street are being
detected
■ Sudden temperature changes
due to weather (wind, rain, snow)
or air expelled from fans, open
windows
■ Sensor-switched LED floodlight
is moving (swaying) due to gusts
of wind or heavy rain.

Declaration of conformity

This product complies with Low Voltage Directive
2006/95/EC, EMC Directive 2004/108/EC as well
as RoHS Directive 2002/95/EC.
Functional warranty
This STEINEL product has been manufactured with
utmost care, tested for proper operation and safety
and then subjected to random sample inspection.
STEINEL guarantees that it is in perfect condition and
proper working order. The warranty period is 5 years
and starts on the date of sale to the consumer. We
will remedy defects caused by material flaws or man-
ufacturing faults. The warranty will be met by repair or
replacement of the defective parts at our own dis-
cretion. The warranty shall not cover damage to wear
parts, damage or defects caused by improper treat-
ment or maintenance. Further consequential damage
to other objects is excluded.
Remedy
■ Fit new fuse; switch 'ON' mains
switch; check wiring with voltage
tester
■ Check connections
■ Adjust setting
■ Switch 'ON'
■ Fit new fuse, check connection
if necessary
■ Re-adjust
■ Check zone and readjust if
necessary or apply shroud
■ Tilt sensor higher or
apply specific shrouds; adjust
zone, or apply shrouds
■ Change detection zone
■ Change detection zone
■ Change detection zone, change
site of installation
■ Mount sensor-switched LED
floodlight on a firm surface
Claims under the warranty will only be accepted if the
unit is sent fully assembled and well-packed with a
brief description of the fault, a receipt or invoice (date
of purchase and dealer's stamp) to the appropriate
Service Centre.
Repair service:
Our Customer Service Department
5
will repair faults not covered by war-
FUNCTIONAL
ranty or after the warranty period.
Please send the product well packed WARRANTY
to your nearest Service Centre.
- 12 -
YEAR