Operating Determinations; Operation; Cleaning And Maintenance - EuroLite E27 Strobe Bedienungsanleitung

Do not operate the stroboscope without glass pane! "Replace every broken glass pane."
Please consider that damages caused by manual modifications to the device are not subject to warranty.

OPERATING DETERMINATIONS

This device was designed for indoor use only.
Do not shake the device. Avoid brute force when installing or operating the device.
You can install the device at any desired place in dry rooms. Please make sure that the device is not exposed
to extreme heat, moisture or dust. There should not be any cables lying around. You endanger your own and
the safety of others!
Operate the device only after having familiarized with its functions. Do not allow an operation by persons who
do not know the device well enough. Most damages are the result of an unprofessional operation!
Please consider that for safety reasons unauthorized modifications to the device are forbidden!

OPERATION

Caution: Never screw the strobe in without having disconnected the lamp-socket from the mains!
Screw the E-27 STROBE in your E-27 socket. As soon as you switch the lamp-socket on, the strobe flashes
with a flash-rate of 1-3 flashes/second.

CLEANING AND MAINTENANCE

The fuse may be replaced by qualified staff only.
There are no servicable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
When operating strobe lamps, the lamp will reach temperatures of up to 200° C.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS E-27 STROBE:
Power supply: 230 V/50 Hz
Power consumption: 5 W
Flash-rate: 1-3 Hz
Weight: 61 g
Dimensions (Lxd): 117 x 51 mm
Please note: All specifications are subject to change withour prior notice.
10/98 © Errors and omissions excepted.
English
6