Cleaning The Pellet Container - Annual Maintenance - HAAS + SOHN Pelletto-III 419.08 Bedienungsanleitung

Figure 1: Burner dirty
Figure 2: Burner clean
The cleaning intervals for the combustion pot and the
glass panel depend directly on the quality of the wood
pellets (high ash content) and may vary between a few
hours of combustion and several days.
4
1.5. Cleaning the pellet container - annual
maintenance
Heat the pellet stove until the storage tank is completely
empty. Then the protective grille (1) in the pellet tank
may be removed. Then clean the tank and the intake of
the screw conveyor housing with a vacuum cleaner.
After cleaning, it is essential to put back the protective
grille. When doing this, make sure that no screws fall
into the pellet tank so as to avoid consequential damage
to the screw conveyor.
Figure 3: Pellet tank
Protective grille (1)
Tank cover (2)