Please Note The Following - SC Aster Bedienungsanleitung

SC Aster – Operating and changing the vaping mode

Please note the following:

1� Only lock the resistance when the coil is at room temperature� This will ensure that the correct
base resistance of the atomizer coil is locked�
2� In resistance lock mode, the Aster saves the set base resistance� But when the temperature rises,
the resistance may increase� So when you change the coil in Unlock mode, the screen displays
"New coil up same down" and the coil resistance can be readjusted� If the coil is the same as
before, press the down button� If it is a different coil, press the up button� Be sure to unlock the
resistance when you want to change an atomizer or to a coil of different resistance�
3� If you accidentally use a conventional coil or a coil with a resistance above 1�5 ohm in the
modes TC-Ni, Ti-TC, TC-SS or TCR (M1, M2, M3), the Aster automatically switches into VW mode�
50