The Device Functionality - SiDLY Care Bedienungsanleitung

SiDLY Care
Fig. 9. Application menu for SiDLY Care on a phone or tablet – entering
You have to enter the IMEI number correctly. To change the IMEI
number You should delete the band from application and add it again.
After a maximum of 30 minutes from
carrying the above steps, you will re-
ceive a message SMS on emergency
phone number entered in application. A
message is as follows: "Congratulations!
Your SiDLY Care has been configured
and is ready for use! Correct skin tem-
perature will be displayed 30 minutes
5.5.

The device functionality

There are active the device functionali-
ty when you first switch the device on:
— band removal detection,
— pulse and temperature measure-
ment,
— medicines reminder,
— SOS function,
— GSM / GPRS Communication,
— fall detector.
of emergency numbers
WARNING!
after fitting the band. Please remember
that skin temperature is lower than body
temperature. Measurements submitted
are indicative. We wish you satisfaction
with using the device". The above pro-
cedure occurs only when the device is
switched on for the first time.
There is required a cooperation with a
dedicated mobile application for proper
operation of all device functionality.
The following figure shows information
about the LED colours and their reaction
depending on the functions carried out by
the device.
EN
41