Citizen CT-S280 Benutzerhandbuch Seite 29

2. Selecting memory switch
When the FEED switch is pressed short (within 2 seconds), printing occurs
in the order of "Memory SW1" → "Memory SW2" → "Memory SW3" →
....."Memory SW10"→ Save To Memory → "Write/Factory Setting" →
"Memory SW1" → ...... repeatedly. When the memory switch you want to
change is reached, press and hold the FEED switch (for more than 2
seconds).
3. Selecting each switch item
There are 1-14 setting items for each switch. Press and hold the FEED
switch for long, the printer goes to the next item and prints the current
setting of the item. Repeat pressing and holding till the item you want to
change setting is reached.
Power ON Info (Send)
4. Changing the setting
When the item you want to change is reached, press the FEED switch short.
The changed set value is printed. (To return to the previous setting press
the FEED switch short). When you press the FEED switch long, the set
value is accepted and then the printer goes to the next setting item.
5. Returning to the memory switch select mode
When the setting of the desired content is completed, open the paper cover
and then close the paper cover. This allows the printer to print the setting
of the changed memory switch.
6. Saving the setting and exiting the memory switch setting mode
Press the FEED switch short to move to "Write/Factory Setting". Then
press and hold the FEED switch. The printer prints the content of new
setting and exits the memory switch setting mode to return to the normal
standby state.
* Unless saving the setting is executed, the changed setting cannot be
enabled.
7. Initializing the memory switch
When you want to return the memory switch setting to the initial state, go
to "Write/Factory Setting" in the above procedure. Here, open the paper
cover and press and hold the FEED switch till buzzer sounds. This allows
the printer to return to the initial state.
* All the memory switches settings are returned to the factory set values.
— 24 —
Items with ERROR LED lit are
those values selected currently.