Operation - Wisi OV 45A Betriebsanleitung

7. Operation

( ) ( )
Use the UP/DOWN
to change the digits in the menu lines.
Enter and leave the menu line and move between digits with the
( ) ( )
L/R keys
To accelerate input: hold the key down.
Operating step
Selection:
Amplifier/converter
Input frequency
In steps of 0.25 MHz
(picture carrier)
Output frequency
In steps of 0.25 MHz
(picture carrier)
Output level
AGC
Is activated after data
are saved
Gain
Frequency mode
of input section
(GB)
keys to select the menu items and
.
Display Display examples
Amp/Con Convert =
converter mode
Amplif =
amplifier mode
If Amplif is selected, the operating
step "Input frequency" is skipped.
F-In 45-862.00 MHz
F-Out 45-862.00 MHz
0-10 = 0-10 dB
Out-Att
Reduction of output level
AGC ON/OFF
If "ON" is selected, operating
step "Gain" is skipped.
Gain 0...20
Internal gain of the input tuner
adjustable in 20 steps
Special Mode 0, 1, 2
Interference products <60 dB may
be visible in TV channel. These
can be suppressed by selecting
another mode. Standard setting
when input frequency is changed
is mode 0.
- 5 -