LIGHTMAX Shaft 5R Bedienungsanleitung Seite 25

Tilt Inverse
Pan Tilt Swap
Lamp on via
Lamp off via
Reset via DMX
Lamp on by
Lamp off if no
Setting
Factory reset
Manual control Lamp on or off
Reset function
Adj DMX value
Test Display DMX
Run Program
Advanced Access Code
ON/OFF
ON/OFF
ON /OFF
DMX
ON /OFF
DMX
ON /OFF
ON/OFF
Power on
ON/OFF
DMX
Language Simplified
Chinese / English
Display Brightness
Light Mode
Light time
Inversion
Cancel /Confirm
Lamp on or off
Reset all
Reset Effect
Reset Pan/Tilt
value
Motor correction
_ _ _ _
According to the scene choose
the vertical scan direction
Choose the lamp horizontal
and vertical control exchange
or not . ( For hanging lamps )
Choose opening the bulb by
control table or not
Choose closing the bulb by
control table or not
Choose resetting the
equipment by control table or
not
Choose lighting bulb
automatically by power on or
not
Choose turning off bulb or not
automatically if no DMX
Switch Chinese or English
Adjust LCD backlight brightness
100 .Changeable values:5-100
Choose the light mode
Screen lighting time 20
.Changeable values 5-60s.
Display inversion ON/OFF
Factory reset or not
Turn on or turn off
Reset the whole light or not
After choosing, effective parts
(color、 gobo、strobe、lens )
reset
After choosing, horizontal and
vertical parts reset
unused
After choosing ,display current
DMX channel value
unused
Correct stepper motor site to
bring out the full potential of
the equipment (the function is
suitable for persons familiar
with stage light equipment)
24