LG P720 Benutzerhandbuch Seite 150

Video camera
3D focus - You can manually fine-tune 3D focus by
b
adjusting the amount of overlapping with a bar that
appears at the bottom. Before starting to take a 3D
video, you can use this function. You can't adjust
this function while recording.
Brightness - This defines and controls the amount
c
of sunlight entering the video. Slide the brightness
indicator along the bar towards "-" to lower the
video brightness or "+" to increase it.
Flash - Allows you to turn on the flash when
d
capturing a video in dark place.
Settings - Touch this icon to open the settings
e
menu. See Using the advanced settings.
3D focus mode - Select the auto 3D focus
option from Border, Center. Border uses a
border area for optimizing the amount of
overlapping. Center uses a center area for it.
You can also find-tune manually with 3D focus
function of viewfinder.
Stabilization - Set On to compensate
unsteady hand.
1
Open the Camera application and touch the
camera mode button. The capture icon
will change to
2
The video camera viewfinder will appear on
the screen: touch the 3D button
3
Holding the phone in landscape view, point
the lens towards the video subject.
4
Touch the start video icon
blinks at the bottom of the viewfinder, along
48
.
.
. A red light
with a timer showing the length of the video.
5
Touch the stop video icon
recording.
NOTE
3D camera mode is only allowed in
•
landscape view.
Keep the distance between the camera and
•
the object more than 0.5m.
For the optimal 3D viewing experience, hold
•
the device 30~40cm away from your eyes.
to stop