Names Of The Subject Areas - Lust CDA3000 Bedienungsanleitung

Note:
ranges the value is entered as an exponent
(e.g. 10.00 E3 = 10,000; 25.15 E-2 = 0.2515). Use the up
key to increase the flashing character and the down key
to move to a new character.

1.6.1 Names of the subject areas

The names of the subject areas comprise a two-digit number and an
abbreviation for the range (example: _36KP = K
36 signifies the range of parameter numbers from 360 to the next
subject area _38TX - that is, to parameter number 380.
Note:
362 or 371 are usually to be found in subject area _36KP!
Exceptions: For reasons of compatibility, the parameter number is
not always based on the subject area number, e.g. 1-MODE in sub-
ject area _36KP. However, the only exceptions are parameter num-
bers < 150 and 400 - 499.
K P Abbreviation for
EY AD
_15FC First Commissioning
_18IA Inputs Analog
_20OA Outputs Analog
_21ID Inputs Digital
_24OD Outputs Digital
_26CL Control Location
_27FF Fixed Frequencies
_28RS Reference Structure
Output frequency
_30OL
Limits
_31MB Motor Brake
_32MP Motor Potentiometer
_33MO MOtor protection
_34PF Power Failure bridging Power failure bridging
_36KP KeyPad
_38TX TaX values
Table 2.2
K P KP200
EY AD
1 Using the K
In the case of parameters with large value
This means that parameters with number
Overview of subject areas (depending on user level)
P KP200
EY AD
Subject area
(D M
RIVE ANAGER
First commissioning
Analog inputs
Analog outputs
Digital inputs
Digital outputs
Control location
Fixed frequencies
Reference structure
Frequency limits
Motor holding brake
MOP function
Motor protection
K P KP200
EY AD
Device capacity utilization
1-9
P ). The number
EY AD
User level
) 1-MODE
2
2
3
3
3
3
2
3
2
3
3
3
3
3
3
DE
EN