Install The Driver - Icy Box IB-DK401 Handbuch

IB-DK401
USB 3.0 Display and Multi Port Docking Station
Display and Port replicator
Description
The USB 3.0 Display and Multi Port Docking Station is designed for extra
connectivity demands.
With the docking station you can extend the connection of a Computer to
more display and USB peripherals, Ethernet network, speaker and micro-
phone through one USB cable.

1. Install the Driver

* Caution: Do not connect the adapter to your computer before installing
the driver from the delivered CD or from the download area of http://www.
raidsonic.de.
Windows 7/8/8.1:
A. Insert the CD into the CD ROM drive.
B. The installer program will run automatically.
C. Click on "Run Setup.exe".
D. Follow the instructions and finish the driver installation.
E. Connect the adapter to a USB port on the PC.
F. Restart the PC.
G. The IB-DK401 is ready to be used.
MAC OS X 10.8:
A. Insert the CD into the CD ROM drive.
B. Run the file Mac_driver\ driver.dmg by double click.
C. Follow the instructions and finish the driver installation.
D. Connect the adapter to a USB port on the mac.
E. Restart the mac.
F. The IB-DK401 is ready to be used.
2. Connection to Monitor/Projector
Connect the USB 3.0 cable to your notebook / PC and connect your monitor
/ projector to the HDMI or VGA port.
* NOTE: When connected to both the HDMI and VGA monitors, the adapter
will automatically switch to the HDMI monitor, and disable the VGA monitor.
Please setup your display settings accordingly to your operating system and
requirements.
For detailed information of your operating system, see the corresponding
operation manual and description of your operating system.
EN