Klugmann dormagen Handbuch Seite 15

suitable for washing or regeneration and should be replaced at least once
every three months, or more frequently in case of intensive use of the hood.
Carbon filter replacement
1. Disconnect the hood from the mains,
2. Remove the grease filters,
3. Remove the carbon filter, which is located inside the hood on the motor
housing, on both its sides (Fig.14), by turning it counterclockwise,
4 Acting inversely to point 3, put a new filter on the motor turbine housing
and turn it around to protect it from slipping.
NOTE:
Always remember to replace both filters at the same time.
7.3 LIGHTING
The lighting system consists of two SMD LEDs with a power of 2w each
(Fig.15).
Fig.14
Fig.15