Mic Setups; General Settings - Bosch MIC440 Installationshandbuch

MIC440 Explosion Protected CCTV Camera System| Installation and Operation Manual

MIC Setups

The MIC Setups tab contains the basic camera controls such as General Settings,
Multi alarms (if MIC-ALM card is fitted), Relays, AutoHome options and the Default
Settings.
Bosch Security Systems

General Settings

Pan Reverse
This will invert the pan rotation of the MIC compared to the commands from the
controller. This would be used if a MIC was inverted to regain logical control.
Tilt Reverse
This will invert the tilt rotation of the MIC compared to the commands from the
controller.
Image Flip
This manually inverts the image from the camera module, which may be used on
an inverted camera where the head cannot be rotated through 180 degrees.
Inverting the image would normally also require some modification of the control
directions.
Issue 7
EN | 29