Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OWNER'S MANUAL
360° motion and light sensor light bulb socket
Safety Instructions
Read the instruction manual carefully before first use and
keep it for future reference.
1. Protect this product from humidity, water and any
other liquids. Avoid using / storing it in extreme
temperatures. Do not expose it to direct sunlight and
sources of heat.
2. Keep the device beyond the reach of children.
3. Product suitable for indoor use only.
4. Do not attempt to repair this device yourself. In case
of damage, contact with an authorized service point
for check-up/repair.
5. ALWAYS disconnect this device from power supply
before cleaning.
6. Clean this device with soft, slightly damp cloth only.
7. Use only with ceiling-mounted, bare bulb light socket.
8. Do not touch the lamp holder, bulb socket or bulb
with wet hands.
9. Turn light OFF before installing this device.
10. The motion sensor distance will be reduced if the
ambient temperature is above 30 degrees.
11. Do not cover the detection lenses!
Installation & operation
The product adopts light and movement sensors.
Automatically turns light on when motion is detected
(provided the light intensity is not strong enough).
When the movement is no longer present the light is
turned off after preset delay time (15-160 s).
EN
7
Werbung
