Omnitronic HS-500 Bedienungsanleitung

USER MANUAL
HEADSET MICROPHONE
Feather-weighted headset microphone
The headset microphone
require hands-free operation Via its mini XLR inline jack the microphone is connected to a pocket
transmitter and supplied with phantom power. A windscreen is included in the delivery.
Safety Instructions
!
Maintenance and service operations are only to be carried out by authorized dealers. Damage,
caused by manual modifications on this device is not subject to warranty. If the microphone is used
for other purposes than originally intended or if it is not correctly connected, the product may suffer
damages and the guarantee becomes void.
!
Protect the microphone against humidity and heat. The ambient temperature must always be
between -5° C and +45° C.
Setting into Operation
Ÿ
Put on the headset microphone and place the microphone cartridge close to the mouth into a
convenient talk position.
Ÿ
Connect the mini XLR inline jack of the microphone cable to the input jack of the pocket transmitter.
Ÿ Always use the supplied windscreen to protect the microphone capsule from dust and moisture, and
reduce pop and wind noise to a minimum.
Cleaning
For cleaning the microphone only use a dry cloth. Never use chemicals or water.
Technical Specifications
Type:.................................Condenser
Directivity pattern:.............Cardioid
Frequency response: .......20 - 20,000 Hz
Sensitivity: ........................-44 dB (± 3 dB)
Impedance: ......................1.5 k (± 30 %)
Power supply:...................1.5 - 10 V
.........................................via pocket transmitter
Current consumption: .......approx. 0.5 mA
Connection: .....................3-pin mini XLR inline jack
Cable length: ....................approx. 1.2 m
Dimensions:......................250 x 120 x 150 mm
Weight: .............................10 g
Please note: Every information is subject to change without prior notice. 10.10.2009 ©
HS-500
was designed for vocal sound and speech applications which
.
W
1 = ground
3 1
2 = audio signal
2
3 = power supply
www.omnitronic.com
00049584.DOC, Version 1.0