Omnitronic HS-105 Bedienungsanleitung

USER MANUAL
HEADSET MICROPHONE
Headset microphone for TM-105
The headset microphone
require hands-free operation and is ideally suited for use with the multifrequency transmitter
TM-105
, which is a component of the PA system
Safety Instructions
!
Maintenance and service operations are only to be carried out by authorized dealers. Damage,
caused by manual modifications on this device is not subject to warranty. If the microphone is used
for other purposes than originally intended or if it is not correctly connected, the product may suffer
damages and the guarantee becomes void.
!
Protect the microphone against humidity and heat. The ambient temperature must always be
between -5° C and +45° C.
Setting into Operation
Ÿ
Put on the headset microphone and place the microphone cartridge close to the mouth into a
convenient talk position.
Ÿ
Connect the 3.5 mm jack of the microphone cable to the input jack of the pocket transmitter
Ÿ Always use the supplied windscreen to protect the microphone capsule from dust and moisture, and
reduce pop and wind noise to a minimum.
Cleaning
For cleaning the microphone only use a dry cloth. Never use chemicals or water.
Technical Specifications
Type:.................................
Directivity pattern: .............Omnidirectional
Frequency response: ........20 - 20,000 Hz
Sensitivity: ........................-45 dB (± 3 dB)
Impedance: ......................1000
Power supply: ...................1.5 - 16 V
.........................................via pocket transmitter
Connection: ......................3.5 mm stereo jack plug
Cable length: ....................1.2 m
Weight: .............................20 g
Please note: Every information is subject to change without prior notice. 10.10.2009 ©
Downloaded from www.Manualslib.com
HS-105
was designed for vocal sound and speech applications which
Condenser
W
(± 30 %)
manuals search engine
W.A.M.S.-05
.
www.omnitronic.com
TM-105
.
00049588.DOC, Version 1.1