Description Of The Device; Technical Data - Mannesmann 17790 Bedienungsanleitung

Description of the device

1. Saw blade
2. Retainer
3. Sawshoe
4. Retainer unlocking device
5. Capacity indicator
6. Battery pack
7. Battery unlocking button
8. Trigger
9. Safety switch
10. Sawblade holder
11. Loading station

Technical data

Garden saw
Voltage
Return stroke speed
Stroke length:
Cutting width:
Saw blade:
Sound pressure level (LpA):
(Measurement uncertainty K = 3 dB)
Sound power level (LwA)
(Measurement uncertainty K = 3 dB)
Vibration:
(Measurement uncertainty K = 1.5 m/s²)
Battery
Voltage
Charger
Input: 100-240 V~ / 50-60 Hz
Output:
Please wear working gloves, protective goggles and ear protection
• The vibration level which is specified in these instructions was measured according to a
measurement method which is standardised in EN 60745 and can be used to compare
devices.
• The vibration level will change depending on the application of the power tool and may in
some cases exceed the value which is specified in these instructions. The vibration load
may be underestimated if the power tool is regularly used in such a way.
• Note: To assess the vibration load correctly during a certain working period, the times in
which the device is off or runs but is not used should also be considered. This may
significantly reduce the vibration load over the entire working period.
10.8 V
0-2,500 rpm
20 mm
max. 80 mm
152 mm
10.8 V, 1.5 Ah, Li-Ion
12.6 V, 1500 mA
79 dB(A)
90 dB(A)
8.7 m/s²
GB - 10