Herunterladen Inhalt Inhalt Diese Seite drucken

Specifications - H-tronic 2242218 Anleitung

Bleibatterie-lader
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

fully charged. Batteries of different capa-
cities can be charged, bigger batteries
have a longer charging time whereas
smaller batteries have a shorter one. As
far as the charging process is concerned,
it does not make any difference whether
the battery is partly or fully discharged.
The batteries may also remain connected
to the charger, the ambience temperature
should not exceed approx. 50 °C. If by
accident the battery is poled incorrectly
when being connected to the charger, this
will be signaled by a red LED "reverse-
poled" and the charge current will be
switched off automatically.
Note
• When charging batteries it is necessary
to ensure that the connection of the bat-
teries are correctly poled.
• Never deep charge the batteries to avo-
id damage of the batteries.
• During the charging process ensure that
the room is sufficiently ventilated.
• Open the cell plug of the lead-acid bat-
teries (if available).
• Check the acid level of the lead-acid
battery before charging.
• Check the acid level from time to time
when charging for a longer period of
time.
• Avoid open fire, open light and sparks
near the charging batteries (danger of
explosion through oxyhydrogen gas).
• It is necessary to consider the charging
instructions of the respective battery
manufacturers (mostly printed on the
battery).l

Specifications

Charging
end
Volt/13,8 Volt
Max. charge current: 0,6 Ampere
voltage:
2,3
Volt/6,9
Operating voltage: 230 Volt / 50 Hz
Measurements: 90 x 56 x 60 mm
If it is to be assumed that an operation
free of risks is no longer possible, the
device must be switched off immediately
and it must be ensured that it cannot be
switched on accidentally.
This applies:
• if the device shows visible damages
• if the device is no longer operational
• if components of the device are loose or
disconnected.
• if the connecting cables show visible
damages.
If the device needs repair,
If the device needs repair, only original
accessories may be used.
The use of different accessories can cau-
se damage to person and property.
A repair of the device may only be carried
out by a tradesman.
We issue a 2-years guarantee. The gu-
arantee includes free defect elimination
that can be linked to defective material
or fabrication defects, further claims are
excluded.
We do not assume neither warranty nor
liability for damages or secondary dama-
ge in relation to this product. We reserve
the right to repair, touching up, supply
of components or reimbursement of the
purchase price. If the following criteria are
complied with a repair will be carried out
or the warranty claim expires.
Warranty claim:
The retailer/ manufacturer where the de-
vice was acquired, offers a warranty of
2 years since handover for material and
14

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Al 600compact

Inhaltsverzeichnis