Werbung
H560 Dewpoint Pro
– Precision measuring instrument
Summary
1. Handling
1.1. General advice
1.2. Operation
1.3. Switching on/off
1.4. Functions
1.4.1. Measuring unit switching °C/°F
1.4.2. Calibration (Offset-adjustment)
1.4.3. MAX/MIN
1.4.4. HOLD
1.4.5. AUTO-OFF-function
1.4.6. Dewpoint / Wetbulb (Td/Tw)
2. Power supply / Changing the battery
3. Technical data
4. Guarantee
8
Seite 8
H560 Dewpoint Pro
1. Handling
1.1
1.2. Operation
1.3. Switching on and off
1.4
1.4.1 Measuring unit switching °C and °F
1.4.2 CAL-option (how to adjust the instrument)
1.4.3 Display MAX / MIN
– Precision measuring instruments
General advice
• For cleaning the instrument please do not use abra-
sive cleaner, but a dry or damp cloth.
• Please store the measuring instrument in a dry and
clean place when not in use.
• Avoid any force like shocks or pressure to the instru-
ment.
• A retractable stand on the back of the instrument
allows it to be used as a bench top instrument.
Before switching on the instrument insert the bat-
tery.
By operating the ON/OFF-key the instrument swit-
ched on or off. For switching off please keep the
ON/OFF-key pressed for appr. 3 seconds.
Functions
(Celsius / Fahrenheit)
To change the measuring unit push °C/°F-key once.
Press down Max/Min key and Clear key together
down for 5 seconds, the display will show 0% only.
You enter the calibration mode. Press Td/Tw key, will
will see the display change from 0% to 1%, 2% etc.
Select the compensation you want say 2 % then press
Max/Min to exit. All the humidity value will be add
2%.
When in calibration mode as above, press Clear key
once, you enter the calibration of temperature. Press
Td/Tw key to select the value of compensation.
Press down Max/Min-key, the display will show the
highest humidity and temperature measurement;
9
Werbung
