Ferm ATM1044 Übersetzung Der Originalbetriebsanleitung Seite 9

Please use Airline Lubricating Oil into the
air inlet on the handle of the Airnailer.
When there is no oil mist lubricator available,
add oil via the QD coupling once or twice a day,
while using. Just a few droplets of oil each time
is sufficient. Excessive oil will simply accumulate
in the appliance, which will become noticeable
when tacking.
Use during cold weather
With operation during cold weather, close to
or below freezing point, moisture in the air
pipeline can freeze, making use of the appliance
impossible. We recommend the use of a special
winter lubricant for pneumatic tools, or the
permanent use of antifreeze (glycol) as lubricant
when the temperatures are low.
Avoid storing the tool in a cold environment, to
prevent frost or ice formation on the operating
valves and mechanisms, which might cause
malfunction of the appliance.
Remark: Some commercial dehydrating fluids for
air pipelines are harmful to O­rings and
seals. Do not use these desiccants for
low temperatures without being certain of
compatibility.
ENVIRONMENT
To prevent damage in transit, the machine is
delivered in sturdy protective packaging. The
packaging is, as much as possible, made from
recycled materials. Therefore, take every possible
step to recycle the packaging.
WARRANTY
For the conditions of warranty, please refer to the
separately provided warranty card.
9