Defining Prioritisation Of Programs - Grasslin talento smart Betriebsanleitung

DEFINING PRIORITISATION OF PROGRAMS

You specify the order in which the programs of the device should be run using prioritisation . You can thus
EN
execute a daily switching command, but can define via a higher priority, that, for example, other switching
times of the device are valid during holidays .
The choice of priority is only possible in advanced mode .
By default, the priority is specified as follows:
• Without date  very low
• With date reference  medium
• With individual date  high
The following priorities can be set:
• Very Low
• Low
• Medium
• High
• Very High
Example:
A daily program switches on the device every day from morning 08:00 to 17:00 in the afternoon. If, for ex-
ample, you do not want the device to switch on on weekends of a holiday, create a program with a higher
priority for these days . This program takes precedence over the other settings .
60