Grasslin talento smart Betriebsanleitung Seite 54

Programming command
B
Menu
Menü
OK
Program
Programm
New OK
Neu
With Date? OK
Mit Datum?
Yes/No
Ja / Nein
1 . Press the button:
Menu
2 . Select and confirm with
Program
For clarification of the following action steps, see flow chart.
3 . Select and confirm with
New
4 . In step ,specify whether the device is to be activated on a certain date and - if yes -
With Date?
confirm with (also refer to Page 51) .
OK
5 . Select and confirm with
OFF
6 . Enter hour and minute of the switch-off time (+/-) and confirm each with
NOTE: The data for sunrise and sunset should be considered in connection with the astro-variant .
The choice of these parameters is between 11 p .m . and midnight .
7 . Set the weekday(s) (+/-) to which the switching time should apply, and confirm with
NOTE: The weekdays 1-5, 6-7 and 1-7 are preset . Individual weekdays can be set (+/-) under "Select
days" .
8 . Select channel (+/-) for which the switching time should be set, and confirm with
(1)
NOTE: The plus sign stands for an active, the minus sign for an inactive channel .
9 . Select to create an additional switching time, or select
YES
the possible priority
(2)
The channel selection is only available with 2-channel timers
(1)
The choice of priority is only possible in advanced mode; refer to "Defining prioritisation of programs"
(2)
on Page 60 .
OFF
OK
Select FNC
FKT wählen
OFF
Aus
Time
Zeit
09:01
09:01
Hour
Stunde
Time
Zeit
09:50
09:50
Minutes
Minuten
Days
Tage
12345--
12345--
Mo-Fr
Mo-Fr
OK.
.
OK
.
OK
.
Kanäle Channels
1
1
CH1
CH1
OK
OK
OK
O
to determine
NO
OK
(1)
(1)
OK
Add Time?
Weitere Schaltzeit?
Yes/No
Ja/Nein
OK
Priority
(2)
Priorität (2)
High
Hoch
.
K
.
OK
.
OK
54
EN