Setting the measurement unit
•
Press the Mode button
neously for at least 3 to 4 seconds.
The device switches to the other measurement unit.
Possible measurement units: Celsius °C and Fahrenheit °F.
Setting the measurement sound
•
Press the Sound button
Each time the button is pressed, the sound switches on or off.
If the display shows
sound.
If the display shows
emit sound.
This setting is not stored. The next time the device is switched on, the
sound is reset to
and MEM button
briefly.
after pressing the button, the device emits
after pressing the button, the device does not
.
Getting started
simulta-
GB
29