Philips qc5170 Bedienungsanleitung Seite 11

 Remove the comb attachment. (Fig. 11)
 Apply pressure to the centre of the cutting element to open
it (Fig. 1).
 Place the lug of the precision trimmer into the slot and push the
cutting element back onto the appliance ('click'). (Fig. 15)
Cleaning
Do not use abrasives, scourers or liquids such as alcohol, petrol or
acetone to clean the appliance.
Only clean the appliance and the adapter with the brush supplied.
Be careful that the cutting element does not fall on the floor.
1 Clean the appliance every time you have used it.
 Make sure the appliance is switched off and disconnected from the
mains before you clean it.
 Remove the comb attachment (Fig. 11).
 Apply pressure to the centre of the cutting element to open
it (Fig. 1).
5 Clean the cutting element with the brush supplied (Fig. 16).
6 Clean the appliance with the brush supplied (Fig. 17).
7 Close the cutting element by pushing it back onto the appliance
('click') (Fig. 18).
The appliance does not need any lubrication.
replacement
Only replace a worn or damaged cutting element with an original Philips
cutting unit.
English
11