Technical Data; Declaration Of Conformity; Safety Instructions - Wolf MAMBO EVO Original Bedienungsanleitung

1.0 Technical Data

Power supply . . . . . . . . . . . . . . . .230 V 50 Hz / 115 V 50-60 Hz
Power consumption . . . . . . . .2000 W (230 V) / 1500 W (115 V)
No-load speed . . . . . . . . . . . . . . . . . . . . . . . . . . .100 - 400 rpm
Sound pressure level . . . . . . . . . . . . . . . . . . . . . . . . . .56 dB(A)
Sound energy level . . . . . . . . . . . . . . . . . . . . . . . . . . .69 dB(A)
Hand/Arm-Vibration . . . . . . . . . . . . . . . . . . . . . . . . . .< 4,5 m/s
Weight . . . . . . . . . . . . . . . . . . . .52 kg + 18 kg additional weight
Diameter of discs . . . . . . . . . . . . . . . . . . . . . . . . .375 - 400 mm
2.0

Declaration of Conformity

We declare under our sole responsibility that this product is in con-
formity with the following standards of standardization docu-
ments:DIN EN 1037, EN ISO 12100, DIN EN 60204-1, DIN EN
60745-1, DIN EN 55014-1, DIN EN 55014-2
according to the provisions of the: 2006/42/EC, 2004/108/EC,
2006/95/EC.
Dipl.-Ing. (FH) Dieter Hammel
Authorised to issue this declaration and for the
gathering of the technical documentation.
13.07.2012, on behalf of
WOLFF GmbH & Co. KG | D-74360 Ilsfeld | Ungerhalde 1

3.0 Safety instructions

Disconnect the power supply before any maintenance is carried out.
Use only recommended mounting discs and brushes. The
mounting discs must have a plain surface. Use only genuine
Wolff discs and brushes. Other parts could affect the safety of
the machine.
Always use the safety- and suction ring. Otherwise parts of the
subfloor may be cast out and endanger other persons.
Always lock the additional weight with the screw nuts. Use only
the genuine Wolff weight. Do not use any other weights!
Maintenance should be undertaken only by qualified personnel.
Use only genuine Wolff spare parts.
Use only appropriate detergent liquids.
Check the power cord and the plug before starting. Both of them
must be in perfect condition, the insulation must not be damaged.
Have damaged insulation repaired at once, before starting the
machine.
Otherwise this may result in considerable danger to the user.
Speed control
For your own safety start work always at low speed, and then
increase the speed. This is especially important, if the subfloor
condition or the discs used are not well known.
08/2010 Schleifmaschine MAMBO EVO, #061804
Comes with:
Grinding machine Mambo
safety- and suction ring
additional weight
ear protectors
operation manual
2
safety- and suction ring
screw nuts Additional weight
13