Cleaning And Descaling; Descaling - Medion MD 17022 Bedienungsanleitung

PLEASE NOTE
The coloured light in the water level gauge lights up during use.

Unplug the mains power supply.

7. Cleaning and descaling

CAUTION!
Risk of injury through burning.
 Empty the kettle before cleaning.
 Allow the appliance to cool down before cleaning.
WARNING!
Risk of injury from electric shock/short circuit.

Pull the mains plug from the socket and allow the
appliance to cool down completely.
 Do not clean the base plate. Never use hard objects on the
base plate and do not immerse it in water.
 You can clean the exterior of the water container using a damp cloth. Just rinse
the inside with clean water.
 Rinse the removable filter in the spout by hand.
 To do this, reach into the spout from the outside and press the locking mechanism
and then carefully push the filter into the kettle to remove it.
 When inserting the filter again, ensure that the lower retaining lug is sitting on
the guide rail.

7.1. Descaling

To prolong the appliance's service life and to keep boiling times short, the kettle
must be regularly descaled. We recommend an environmentally friendly descaling
process using vinegar or citric acid:
1. Add a dose of vinegar (ratio of 1:3) or citric acid (2 heaped tablespoons to 1 litre
of water) to the water.
2. Allow the liquid to stand in the appliance for approx. 1 hour.
3. Now boil the liquid in the kettle.
4. Then rinse the water container thoroughly with clean water.
5. If you want to use a commercial descaler (chemical product), observe the in-
structions provided by the manufacturer of the product.
DE
FR
IT
EN
63 of 68