Technical Data - Obid Id Rw02.10-Ad Montage Und Installation

®
OBID

5. Technical data

• Housing for flush-mounting box
Dimensions (W x H x D)
Color
• Surface Adapter
Dimensions (W x H x D)
Color
Weight
Protection class
Supply Voltage
Power consumption
Temperature range
Relative air humidity
MTBF
Antenna
Operating Frequency
Supported Transponder types
LED
Buzzer
Relay
Digital Inputs
Interfaces
DIP-switch
Flash
EEPROM
Default Settings
asynchronous interface:
IN1
IN2
LED-operation control
Page 26 of 28
Operation
storage
asynchronous
(lead in wire max. 10 m)
(lead in wire max. 3 m)
Data / Clock
Magnetic Stripe Emulation
Wiegand-Emulation
9600 Baud, 8 data- 1 stop bit, even parity
activates LED red and relay
activates LED green and buzzer
orange
Installation
ID RW02.10-AD
84 x 84 x 22 mm
Corpus: white / Face plate: black
77,7 x 77,7 x 18,0 mm
light grey
approx. 150 g
IP 54
12 - 24 V AC/DC
max. 2,5 W
-25 °C to +70 °C
-40 °C to +85 °C
95 % (non-condensing)
307000 h
integrated
125 kHz
ID CTx.A (e.g. H4001, 4002)
ID DTx.B (HITAG1 and HITAG S)
ID DTx.C (HITAG 2)
bicolor (red, green, orange)
integrated
1 x normally open
capacity of contacts: 24 V AC/DC 1,5 A
2 x configurable
length of lead-in wire max. 3 m
4800 to 38400 Baud
RS232
TTL
8-channel
64 kB (In-Application Firmware update )
512 B (10.000 writing cycles)
ID RW02.10-AD/-B
ID RW02.10.-B
RS485
(max. 32 units on each data bus)
-
FEIG ELECTRONIC GmbH