Adjusting the visor, fig . J
You can adjust the distance between the visor
and your face by moving the visor manually (see
fig . J) .
Alternatively, you can flip the visor
up .
Maintenance, cleaning, storage
and transportation
■
Examine the components for damage and signs
of wear before each use .
■
Always clean the helmet after finishing your
work .
■
Use a moistened cloth to clean the helmet, ear
protectors and visor . Never use petrol, solvents
or cleansers which can damage plastic .
■
To disinfect the helmet and ear protectors, use
only cleaning agents that do not contain sol
vents or aggressive substances .
■
Store the helmet, ear protectors and visor in a
clean, dry environment away from UV rays .
■
The helmet can be transported in the box in
which it was sold .
Durability
■
The materials used for the helmet age naturally .
Only use the helmet for a maximum period of
5 years .
Please refer to the foldout page (fig . M) for
the date of manufacture . The same symbol is
imprinted into the helmet .
FFSH 3 A1
Disposal
all the way
currently applicable regulations . Please contact
your waste disposal facility if you are in any doubt .
Dispose of all packaging materials in an environ
mentally friendly manner .
Service
Importer
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
DE 44867 BOCHUM
GERMANY
www .kompernass .com
Dispose of the product via an approved
waste disposal company or your munici
pal waste disposal facility . Observe the
Service Great Britain
Tel .: 0871 5000 720 (£ 0 .10/Min .)
EMail: kompernass@lidl .co .uk
Service Malta
Tel .: 80062230
EMail: kompernass@lidl .com .mt
IAN 292272
GB │ MT
│
11
■