General Safety Instructions - FLORABEST FFSH 3 A1 Originalbetriebsanleitung

Explanation of the symbols used on the helmet:
Figure K:
1 .) CE marking
2 .) Applied standard
3 .) Manufacturer type
4 .) Helmet size
Figure L:
5 .) Material
Figure M:
6 .) Month of manufacture
7 .) Year of manufacture (e .g . 2017)
Explanation of symbols on the visor:
Figure N:
8 .) Symbol of the manufacturer
9 .) Symbol for increased strength
10 .) Applied standard
Applied standards:
The helmet has been examined as per:
EN 397: 2012+A1: 2012
The ear protectors have been audited as per:
EN 352­3: 2002
The visor has been audited as per:
EN 1731: 2006
Identification number, name and address of
the inspection body:
0501 CRITT SPORT LOISIRS
ZA du Sanital – 21 Rue Albert Einstein
86100 CHATELLERAULT­France
General safety
instructions
WARNING!
► Read all safety warnings and all instructions .
Save all warnings and instructions for future
reference.
Please pay close attention to the following informa­
tion and safety instructions to ensure the best possible
protection and comfort .
■ Whenever you use the helmet, first check that
all components are properly attached, adjusted
and serviced .
■ Always use the helmet with the correct settings
to ensure the required protection .
FFSH 3 A1
■ The helmet cannot guarantee complete protec­
tion against injury . It does not replace adher­
ence to safe work procedures .
■ Never modify the structure or varnish of the
helmet .
■ The helmet must not come into contact with
liquids containing solvents or alcohol . These
substances can damage the plastic .
■ Knocks or other impacts can cause impercep­
tible impact damage to the helmet, such as
hairline cracks . This compromises the protection
afforded by the helmet, especially in emergen­
cies . Replace the helmet if it has been subject to
extreme stresses .
■ Examine the helmet for damage (cracks, tears)
before every use . Only use the helmet and ac­
cessories if they are in a flawless condition .
■ Do not modify the helmet as this could compro­
mise its protective effect .
■ Please adhere to all instructions and tips
re garding assembly, adjustments and mainte­
nance of the ear protectors .
■ The ear protectors are intended to protect your
ears in noisy areas .
■ They should be worn for as long as the noise
persists .
■ The pads of the ear protectors will show signs
of wear over time . Examine them for tears or
loose spots after each use .
■ Do not clean the ear protectors with chemicals
or substances that are harmful to the wearer .
■ Certain chemical substances can damage this
product . Detailed information is available from
the manufacturer .
■ Ear muffs and especially their foam padding
can wear down over time . Examine them
regularly for tears, loose spots and other signs
of wear .
■ Covering the foam pads with hygiene covers
can compromise the acoustics of the ear muffs .
WARNING!
► Failure to comply with the safety instructions
provided for the ear protectors can seriously
compromise their protective effect .
GB │ MT │ 9 ■