Renkforce HP02 Bedienungsanleitung Seite 3

Operating instructions
HP02 Hi-Fi headphones black
Item no. 1452038
Intended use
The product is intended for use as headphones and is suitable for connecting smartphones,
mobile phones, tablet computers, or other audio devices featuring a headphone socket. The
noise cancelling function eliminates unwanted background noise.
Avoid contact with moisture at all costs.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged.
In addition, improper use can cause hazards such as short circuiting, fire etc. Read the
instructions carefully and keep them. Make this product available to third parties only together
with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Headphones
• 3.5 mm jack cable
• Protective bag
• 2 x batteries (type AAA)
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions from our website www.conrad.com/downloads or
scan the printed QR code. Follow the instructions on the website.
Description of symbols
The symbol with an exclamation mark in a triangle indicates important instructions
contained in these operating instructions that must be followed.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
• Consult an expert when in doubt about operation, safety or connection of the
device.
• Maintenance, modifications and repairs are to be performed exclusively by an
expert or at a qualified shop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) Hearing damage
• Do not listen to excessively loud music over an extended period of time. This may
damage your hearing.
c) (Rechargeable) batteries
• Correct polarity must be observed while inserting the (rechargeable) batteries.
• (Rechargeable) batteries should be removed from the device if it is not used
for a long period of time to avoid damage through leaking. Leaking or damaged
(rechargeable) batteries might cause acid burns when in contact with skin,
therefore use suitable protective gloves to handle corrupted (rechargeable)
batteries.
• (Rechargeable) batteries must be kept out of reach of children. Do not leave
(rechargeable) batteries lying around, as there is risk, that children or pets swallow
them.
• All (rechargeable) batteries should be replaced at the same time. Mixing old and
new (rechargeable) batteries in the device can lead to (rechargeable) battery
leakage and device damage.
• (Rechargeable) batteries must not be dismantled, short-circuited or thrown into
fire. Never recharge non-rechargeable batteries. There is a risk of explosion!
Operating elements
5 4
A
1 Headphone bracket (adjustable)
2 On/off switch with indicator light
3 Mute button
4 3.5 mm jack socket
5 Ear shell (adjustable)
6 Battery compartment lid
7 Battery compartment
Operation
a) Unfolding
The headphones are delivered in folded condition. Fold out the ear shells (5) until they lock
into place.
b) Inserting/replacing batteries
• Observe both diagrams (A, B) in the picture for inserting or replacing the batteries.
• Loosen the battery compartment lid (6) by turning it anti clockwise.
• Insert two type AAA new (rechargeable) batteries into the battery compartment (7). Observe
the polarity markings (+/- terminals) inside the battery compartment while doing so.
1
Adjustable
2
3
6 7
B