Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Connection Scheme for camera/transmitter
Testing the System
1. Reattach the vehicle's negative battery cable.
2. Turn the ignition key to the accessory position, but do not
start the engine.
3. Engage the parking brake, and then put the shifter in the
reverse position.
4. Look at the monitor, if the image does not match your rear
view mirror press the Image Orientation button (10) on the
monitor to correct the image.
After testing the unit and you are satisfied with the route you
have chosen for the cabling, you must permanently install it. Fully
tighten the license plate bolts. Route all wires behind interior
panels or under carpeting in order to hide them. Use supplied
cable ties to neatly gather any excess wire.
Cleaning
22
Werbung
Inhaltsverzeichnis
