Product Description And Specifica- Tions - Bosch Professional GLM 80 Originalbetriebsanleitung

OBJ_DOKU-26741-006.fm Page 19 Tuesday, December 15, 2015 11:13 AM
there is a danger of operating errors
and injuries.
 Supervise children during use,
cleaning and maintenance. This will
ensure that children do not play with
the charger.

Only charge Bosch lithium-ion
batteries with a capacity of
1.25 Ah or more (1 battery cells or
more). The battery voltage must
match the battery charging voltage
of the charger. Do not charge non-
rechargeable batteries. Otherwise
there is danger of fire and explosion.
Keep the battery charger away from rain or
moisture. Penetration of water in the battery
charger increases the risk of an electric shock.
 Charge the power tool only with the supplied charger.
 Keep the battery charger clean. Contamination can lead
to danger of an electric shock.
 Before each use, check the battery charger, cable and
plug. If damage is detected, do not use the battery
charger. Never open the battery charger yourself.
Have repairs performed only by a qualified technician
Technical Data
Digital Laser Measure
Article number
Distance measurement
Measuring range (typical)
Measuring range (typical under unfavourable conditions)
Measuring accuracy (typical)
Measuring accuracy (typical under unfavourable conditions)
Lowest indication unit
Indirect Distance Measurement and Vial
Measuring range
Inclination measurement
Measuring range
Measuring accuracy (typical)
Lowest indication unit
General
Operating temperature
Storage temperature
Allowable charging temperature range
Relative air humidity, max.
Laser class
Bosch Power Tools
and only using original spare parts. Damaged battery
chargers, cables and plugs increase the risk of an electric
shock.
 Do not operate the battery charger on easily inflamma-
ble surfaces (e. g., paper, textiles, etc.) or surround-
ings. The heating of the battery charger during the charg-
ing process can pose a fire hazard.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Product Description and Specifica-
tions
Please unfold the fold-out page with the representation of the
measuring tool and leave it unfolded while reading the operat-
ing instructions.
Intended Use
The measuring tool is intended for measuring distances,
lengths, heights, clearances, grades and for the calculation of
areas and volumes. The measuring tool is suitable for measur-
ing indoors and outdoors.
GLM 80
3 601 K72 3..
A)
0.05–80 m
B)
45 m
A)
±1.5 mm
B)
±2.5 mm
0.1 mm
–60° – +60°
C)
0°–360° (4x90°)
D)F)
0.2°
0.1°
E)
–10 °C...+50 °C
–20 °C...+50 °C
+5 °C...+40 °C
90 %
2
English | 19
GLM 80+R60
3 601 K72 3..
A)
0.05–80 m
B)
45 m
A)
±1.5 mm
B)
±2.5 mm
0.1 mm
–60° – +60°
C)
0°–360° (4x90°)
D)F)
±0.2°
0.1°
E)
–10 °C...+50 °C
–20 °C...+50 °C
+5 °C...+40 °C
90 %
2
1 609 92A 25S | (15.12.15)